Video Hum Eliminator
The HD-HUM-1S is an ultra wide bandwidth hum eliminator that can be used for the reduction or elimination of common-mode noise in both digital and analogue video signals. Due to its ultra-wideband design the HD-HUM-1S is compatible with all digital and analogue signals from DC to 4.5GHz, making the unit compatible with all composite, ASI, 3G-SDI, HD-SDI and SD-SDI video signals.
- Eliminate Noise and Hum From Analogue and Digital Video Signals
- Supports all 3G, HD, SD SDI and ASI Formats
- Supports all Analogue Video Formats
- Passive Device
- High Performance and Wide Bandwidth Design
- Ultra-Compact and Lightweight
The HD-HUM-1S Hum Eliminator is a passive, ultra-high performance, compact hum eliminator which provide a complete solution to the reduction and elimination of common mode hum and noise that can interfere with all types of video signals, both analogue and digital, caused by small differences in ground potential or induced currents in long cable runs. This Hum Eliminator is ideal in situations where ground isolation is not desired, for example when dc or low speed camera controls need to be passed through the device and not blocked.
For Analogue Video signals this noise can result in horizontal or vertical synchronization problems or the reduction in picture
For Serial Digital Video, the interference causes degradation of the absolute bit timing of the digital signal leading to bit errors. These bit errors will reduce the integrity of the video and data content, but since digital signals do not degrade gracefully but suffer from a cliff effect, the digital signal can be lost altogether.
The HD-HUM-1S Hum Eliminator is compatible with all SMPTE and ASI transmission rates up to 2.97Gb/s supporting 1080p/60. In addition they are compatible with all standard and high definition analogue formats.
The HD-HUM-1S Hum Eliminator comes in a compact standalone unit and only weighs 370g/13oz.