HD-SDI Passive Splitter
The HS275B-10B is a 10-channel, 1RU rack mounting unit, that is used as a HD-SDI passive splitter. All input connections are on the rear of the unit and all outputs on the front.
Due to its wideband design the unit is also compatible with SD-SDI, and ASI digital video signals.
- Conveniently split a single source into two outputs
- 10 independent channels
- High performance design with minimal insertion loss
- Supports all HD and SD SDI Formats
- Compatible with ASI Video
- Passive Device
- Fault tolerant operation
- All outputs on unit front, inputs on rear
- 1RU rack mounting unit
The Proton HS275B HD-SDI Passive Splitter conveniently splits a single source into two signals for distribution with minimal loss. Since it is a passive device there is no requirement for power.
The HS275B-10B HD-SDI Passive Splitter has been designed with reliability at the forefront for critical applications. The HD-SDI Passive Splitter is fault tolerant due to the high isolation between the outputs, this allows an open-circuit, short-circuit or incorrect termination on one output to have almost no effect on the quality of the remaining output. This complex transformer arrangement also minimizes output and insertion losses and therefore outperforms simple resistor splitters.
The HS275B-10B HD-SDI Passive Splitter support all of the SMPTE transmission rates between 120Mb/s and 1.5Gb/s and is therefore compatible with all digital video ASI and SDI formats including HD-SDI and SD-SDI, and offers a cost effective alternative to powered distribution amplifiers. The HS275B-10B is housed in a compact 1RU rack mounting unit.
||75Ω ± 2%, unbalanced
||120Mb/s to 1.5Gb/s
||<15dB 270Mhz to 1.5Gb/s
||>Port >22dB; Channel >80dB
||482mm[19″] x 44mm[1.75″] x 30mm[1.2″] excluding connectors
||-25 to +55 deg C [32 to 131 deg F], 5%-95% non-condensing
EN55103-1, EN55103, EN6095, FCC part 15