1-Channel HD-SDI Passive Splitter

$95

HS275B-01S

The HS275B-01S is a single channel, standalone unit, that is used as a HD-SDI passive splitter. Due to its wideband design the unit is also compatible with SD-SDI, and ASI digital video signals.
 
These units are available online, or you can contact us or your local distributor.
 

Description

HD-SDI Passive Splitter

The HS275B-01S is a single channel, standalone unit, that is used as a HD-SDI passive splitter.

Due to its wideband design the unit is also compatible with SD-SDI and ASI digital video signals.

Highlights:

  • Conveniently split a single source into two outputs
  • High performance design with minimal insertion loss
  • Supports all HD and SD SDI Formats
  • Compatible with ASI Video
  • Passive Device
  • Fault tolerant operation
  • Ultra-Compact and Lightweight
  • Standalone Unit

Description:

The Proton HS275B HD-SDI Passive Splitter conveniently splits a single source into two signals for distribution with minimal loss. Since it is a passive device there is no requirement for power.
 
The HS275B-01S HD-SDI Passive Splitter has been designed with reliability at the forefront for critical applications. The HD-SDI Passive Splitter is fault tolerant due to the high isolation between the outputs, this allows an open-circuit, short-circuit or incorrect termination on one output to have almost no effect on the quality of the remaining output. This complex transformer arrangement also minimizes output and insertion losses and therefore outperforms simple resistor splitters.
 
The HS275B-01S HD-SDI Passive Splitter support all of the SMPTE and AES transmission rates between 120Mb/s and 1.5Gb/s and is therefore compatible with all digital video ASI and SDI formats including HD-SDI and SD-SDI, and offers a cost effective alternative to powered distribution amplifiers. The HS275B-01S is housed in a compact standalone unit.

 
Channels: 1
Impedance: 75Ω ± 2%, unbalanced
Bandwidth: 120Mb/s to 1.5Gb/s
Return Loss: <15dB 270Mhz to 1.5Gb/s
Insertion Loss: <3.5dB
Port Isolation: >22dB
Size: 20mm[0.85″] x 50mm[2″] x 30mm[1.2″] excluding connectors
Weight: 50g[1.7oz]
Environmental: -25 to +55 deg C [32 to 131 deg F], 5%-95% non-condensing
EN55103-1, EN55103, EN6095, FCC part 15

 
Product Datasheet    View    Download
 

Reviews

There are no reviews yet.

Be the first to review “1-Channel HD-SDI Passive Splitter”

Your email address will not be published. Required fields are marked *

 

You may also like…